Issues with Ledborg and Pi 3



I have a recently bought an LEDBorg and it has been working on my original Pi model b. I have upgraded to the Pi 3 and attempted to get the Ledborg working on this which I thought would be simple but I cannot seem to get it to work. The LED only flases on for a split second when using the bash script.

I am unsure of how to proceed with this. Please could you give me some advise on what to do next?

I have already tried OS reinstallation, installed wiringpi and checked the pins. I moved the LEDborg back to model B and again it worked in there.

Any help would be greatly appreciated.



piborg's picture

As far as I can tell nothing should have changed for driving the GPIO pins on the Pi 3, it should work as it used to from a shell script.

Just to confirm you do have the LedBorg on the first 26 pins of the Pi like this:

These are the first 26 pins:

I do not have a Pi 3 to test with at the moment, but I do know that the Python examples work fine. Could you try one of them and see if the same strange behaviour occurs?

Subscribe to Comments for "Issues with Ledborg and Pi 3"