BattBorg - Power your Raspberry Pi from AA batteries

Lead free solder

2 meters of lead free solder, perfect for assembling kits.
97.1% Tin, 2.6% Silver, 0.3% copper. Added to 2.2% flux (intended to be no clean) and drawn out to 0.5mm diameter.
Has a lower melting temperature (217 deg C) than most lead free solder (~227 deg C)
Please ensure adequate ventilation and safety whilst soldering.

£3.00
Product: 
Stock: 
0

Soldering Iron 40 Watt

Soldering iron suitable for assembling BattBorg kits, PicoBorgs, motors, and other electronics.
BS approved with a UK standard 13A plug. 230V CE marked.
Please read the included safety instructions.
Please note delivery available only to UK.

£8.99
Product: 
Stock: 
0

8x AA battery holder

Battery holder for 8x AA batteries, with 9V style connector. Comes with matching 9V connector with wires.
Great for use with BattBorg. In our tests a set of 8x 2700mAh rechargeable AAs lasted for approximately 14h 30m using BattBorg.
Batteries not included.

£2.80
Product: 
Stock: 
0

10x AA battery holder

Battery holder for 10x AA batteries, with 9V style connector.
Comes with matching 9V connector with wires.
With 10x AA batteries, BattBorg should run for approximately 25% longer than 8x AAs.
Batteries not included.

£3.30
Product: 
Stock: 
0

2-pin screw terminal

2 pin 5mm terminal block pcb screw terminal for use with BattBorg or PicoBorg Reverse

£1.50
Product: 
Stock: 
0

3 pin male to female cable

3 pin male to 3 pin female cable. 0.1" (2.54mm) pitch. Similar to a servo extension cable, but without the shroud.

£1.50
Product: 
Stock: 
0

5V DC/DC regulator

OKI-78SR-5/1.5-W36H-C DC/DC regulator 7.5Watts, 5V at 1.5A. Ideal for use with BattBorg. Provides 5V from a 7 to 36 volt input.

£6.00
Product: 
Stock: 
0

6 pin female header block

6 pin female header ready to solder for use with BattBorg or connecting your own board to a PicoBorg Reverse or Diablo.

£1.00
Product: 
Stock: 
0

BattBorg bare PCB only

Bare BattBorg PCB ready to solder

£2.50
Product: 
Stock: 
0

Single post mounting kit

2 nylon washers, nylon post, m3 nylon nut and m3 thread nylon screw. Correct length for mounting BattBorg to a PicoBorg Reverse

£1.50
Product: 
Stock: 
0

Quality 9V cable

Quality 9V connector cable for use with 9V battery or AA battery holders with eyelet connectors (such as our 2,4,6,8 and 10xAA holders).
Thick 22AWG 1061 UL/CSA approved wires for low resistance connections and less likelyhood of breakage. 6.5" in cable length.

£2.20
Product: 
Stock: 
0