The PicoBorg Reverse also has PWM controlled motor power, so that is not really a difference :)
The differences between them are:
Bright RGB LED instead of a small red LED
7.0-35.0V input range instead of 6-25V
DC/DC which generates the 5V to power the Raspberry Pi
Battery voltage monitoring (LED can be set to indicate the current voltage)
Can be mounted to most Raspberry Pis without needing cables
Slightly larger size, 64 mm long rather than 48 mm
The library for controlling the ThunderBorg is almost the same as the PicoBorg Reverse library as well. This means if you have any existing PicoBorg Reverse examples they are fairly easy to convert to work with ThunderBorg instead.
piborg
Wed, 01/24/2018 - 11:02
Permalink
ThunderBorg vs PicoBorg Reverse
The PicoBorg Reverse also has PWM controlled motor power, so that is not really a difference :)
The differences between them are:
The library for controlling the ThunderBorg is almost the same as the PicoBorg Reverse library as well. This means if you have any existing PicoBorg Reverse examples they are fairly easy to convert to work with ThunderBorg instead.