DiddyBorg Web and VirtaulHere

Submitted by csgoskinhunt on Wed, 08/01/2018 - 13:48

Forums:

Greetings!

I'm using the DiddyBorg web UI (the one without PiCam code). If I understand correctly, it creates a local server to which you can connect by knowing RPi's local IP adress. I'm building a project, where I'm trying to stream a USB camera over the Raspberry using the free version of VirtualHere while simultanously using the DiddyBorg control panel. This software, like the diddyborg code, also creates a server on the raspberry pi and by installing a client on a sepparate machine, you can use the Pi as a bridge connecting the USB camera with, for example, a PC. It is like "Pluging" the USB device (in this case, a camera) in a remote machine.

I was wondering do these two servers constrict since the code and the VirtaulHere both create a localhost server? By that I mean, in both cases you connect via localhost.

Would I be able to get it to work just by assigning different ports?

Is it also possible that it would work side by side?

At this time I am unable to test it out and I'm still trying to grasp this so forgive any lack of knowledge and terminology:)

Thanks for the reply!

Regards

piborg's picture

piborg

Wed, 08/01/2018 - 15:21

I have not used VirtualHere, but from a quick read it should happily co-exist with the WebUI as long as both programs are using different ports.

I would try running both and see if they work together as-is. If not it is likely that changing the port number for WebUI will get them both to play nicely :)

csgoskinhunt

Thu, 08/02/2018 - 06:25

Thanks for the reply! I'll get back to you with updates.

Regards!:)

Subscribe to Comments for "DiddyBorg Web and VirtaulHere"