Diddyborg is not running

Submitted by rajeetharan on Mon, 09/16/2019 - 13:57

Forums:

Hei.

when i run diddy2sequence.py
i get the LED from RED to GREEN.

" Loading Thunderborg on bus 1 , address 15
Found Thunderborg at 15
Thunderborg loaded on bus 1 "

and doing nothing.
When i check the voltage between m2+ and m2- zero, also m1+ and m1- zero.

any idea whats wrong happening.

piborg's picture

piborg

Mon, 09/16/2019 - 14:26

Have you checked if the batteries are fully charged?

You should be able to run this command to get a battery reading:
~/thunderborg/tbReadBattery.py

rajeetharan

Mon, 09/16/2019 - 14:30

hi
at this moment im supplying power from usb cable. ( as in testing operation ).
LedWave python script have correct response.

piborg's picture

piborg

Mon, 09/16/2019 - 15:35

Only the Raspberry Pi and ThunderBorg can get power from the USB. The motors take their power from the batteries only.

Subscribe to Comments for "Diddyborg is not running"